dns_get_record
Notice using "tcp" insted of "http"
<?
fsockopen("tcp://example.net",80 , $errno, $errstr, 30);
?>
fsockopen
(PHP 4, PHP 5)
fsockopen — Stellt eine Internet- oder Unix-Domain-Socket-Verbindung her
Beschreibung
resource fsockopen
( string $hostname
[, int $port
[, int &$errno
[, string &$errstr
[, float $timeout
]]]] )
Initialisiert eine Socket-Verbindung zu der in hostname angegebenen Ressource.
PHP unterstützt Ziele im Internet und Unixdomänen, wie sie unter List of Supported Socket Transports beschrieben sind. Eine Liste unterstützter Transportarten können Sie auch mittels stream_get_transports() ermitteln.
Der Socket wird standardmäßig im Blocking Mode geöffnet. Sie können auf den Non-Blocking-Modus wechseln, indem Sie die Funktion stream_set_blocking() nutzen.
Parameter-Liste
- hostname
-
Wenn Sie OpenSSL-Support mit einkompiliert haben, können Sie dem Parameter hostname entweder ein ssl:// oder ein tls:// voranstellen, um eine SSL- oder TLS-Verbindung aufzubauen, die via TCP/IP mit dem entfernten Server verbunden wird.
- port
-
Die Portnummer.
- errno
-
Sofern unterstützt, enthält der Parameter die Fehlernummer des Systemlevels, die beim Aufruf der connect()-Funktion auftrat.
Wenn der Rückgabewert von errno 0 ist und die Funktion FALSE zurückgibt, ist dies ein Zeichen, dass der Fehler vor dem connect()-Aufruf auftrat. Dies ist meist der Fall, wenn es ein Problem beim Initialisieren des Sockets gibt.
- errstr
-
Die Fehlermeldung als String.
- timeout
-
Der Connection-Timeout in Sekunden.
Hinweis: Wenn Sie einen Timeout für das Lesen oder Schreiben von Daten über den Socket setzen wollen, verwenden Sie stream_set_timeout(), da der timeout -Parameter von fsockopen() nur für das reine Konnektieren des Sockets gedacht ist.
Rückgabewerte
Die Funktion fsockopen() gibt einen Zeiger auf eine Datei zurück, der zusammen mit den anderen Dateifunktionen (wie fgets(), fgetss(), fwrite(), fclose() und feof()) verwendet werden kann. Wenn der Aufruf fehlschlägt, wird FALSE zurückgegeben.
ChangeLog
| Version | Beschreibung |
|---|---|
| 4.3.0 | Der Parameter timeout wird nun auch unter win32-Systemen unterstützt. |
| 4.3.0 | SSL und TLS over TCP/IP-Support wurde hinzugefügt. |
| 4.0.0 | UDP-Support wurde hinzugefügt. |
| 3.0.9 | Der timeout -Parameter wurde hinzugefügt. |
Beispiele
Beispiel #1 fsockopen()-Beispiel
<?php
$fp = fsockopen("www.example.com", 80, $errno, $errstr, 30);
if (!$fp) {
echo "$errstr ($errno)<br />\n";
} else {
$out = "GET / HTTP/1.1\r\n";
$out .= "Host: www.example.com\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($fp, $out);
while (!feof($fp)) {
echo fgets($fp, 128);
}
fclose($fp);
}
?>
Beispiel #2 Eine UDP-Verbindung nutzen
Das folgende Beispiel zeigt, wie Sie den Tag und die Zeit vom UDP-Service "daytime" (Port 13) Ihrer Maschine abfragen können.
<?php
$fp = fsockopen("udp://127.0.0.1", 13, $errno, $errstr);
if (!$fp) {
echo "ERROR: $errno - $errstr<br />\n";
} else {
fwrite($fp, "\n");
echo fread($fp, 26);
fclose($fp);
}
?>
Anmerkungen
Hinweis: Abhängig von der Systemumgebung kann es vorkommen, dass die Unix-Domäne oder der optionale Connection-Timeout nicht verfügbar sind.
Warnung
UDP-Sockets werden manchmal ohne die Rückgabe eines Fehlermeldung geöffnet, obwohl der entfernte Host nicht erreichbar ist. Der Fehler wird nur sichtbar, wenn Sie Daten vom Socket lesen oder zum Socket schreiben wollen. Der Grund dafür ist, dass UDP ein "verbindungsloses" Protokoll ist, das bedeutet, dass das Betriebssystem nicht versucht, eine Verbindung zum Socket herzustellen, solange es nicht wirklich Daten senden oder empfangen muss.
Hinweis: Wenn Sie eine numerische IPv6 Adresse angeben, z.B.: fe80::1, müssen Sie die IP in eckige Klammern schreiben, z.B: tcp://[fe80::1]:80.
add a note
User Contributed Notesfsockopen
andrew at enigma-pro dot com
09-Sep-2008 05:28
09-Sep-2008 05:28
mikey at badpenguins dot com
06-Sep-2008 06:00
06-Sep-2008 06:00
My $0.02 on handling chunked transfer encoded output... Has rudimentary error handling.
<?php
//
// Example usage...
//
$server = '127.0.0.1';
$port = '80';
$uri = '/cgi-bin/random-cgi';
$content = 'Your post content...';
$post_results = httpPost($server,$port,$uri,$content);
if (!is_string($post_results)) {
die('uh oh, something went wrong');
} else {
die('Here are your results: ' . $post_results);
}
//
// Post provided content to an http server and optionally
// convert chunk encoded results. Returns false on errors,
// result of post on success. This example only handles http,
// not https.
//
function httpPost($ip=null,$port=80,$uri=null,$content=null) {
if (empty($ip)) { return false; }
if (!is_numeric($port)) { return false; }
if (empty($uri)) { return false; }
if (empty($content)) { return false; }
// generate headers in array.
$t = array();
$t[] = 'POST ' . $uri . ' HTTP/1.1';
$t[] = 'Content-Type: text/html';
$t[] = 'Host: ' . $ip . ':' . $port;
$t[] = 'Content-Length: ' . strlen($content);
$t[] = 'Connection: close';
$t = implode("\r\n",$t) . "\r\n\r\n" . $content;
//
// Open socket, provide error report vars and timeout of 10
// seconds.
//
$fp = @fsockopen($ip,$port,$errno,$errstr,10);
// If we don't have a stream resource, abort.
if (!(get_resource_type($fp) == 'stream')) { return false; }
//
// Send headers and content.
//
if (!fwrite($fp,$t)) {
fclose($fp);
return false;
}
//
// Read all of response into $rsp and close the socket.
//
$rsp = '';
while(!feof($fp)) { $rsp .= fgets($fp,8192); }
fclose($fp);
//
// Call parseHttpResponse() to return the results.
//
return parseHttpResponse($rsp);
}
//
// Accepts provided http content, checks for a valid http response,
// unchunks if needed, returns http content without headers on
// success, false on any errors.
//
function parseHttpResponse($content=null) {
if (empty($content)) { return false; }
// split into array, headers and content.
$hunks = explode("\r\n\r\n",trim($content));
if (!is_array($hunks) or count($hunks) < 2) {
return false;
}
$header = $hunks[count($hunks) - 2];
$body = $hunks[count($hunks) - 1];
$headers = explode("\n",$header);
unset($hunks);
unset($header);
if (!verifyHttpResponse($headers)) { return false; }
if (in_array('Transfer-Coding: chunked',$headers)) {
return trim(unchunkHttpResponse($body));
} else {
return trim($body);
}
}
//
// Validate http responses by checking header. Expects array of
// headers as argument. Returns boolean.
//
function validateHttpResponse($headers=null) {
if (!is_array($headers) or count($headers) < 1) { return false; }
switch(trim(strtolower($headers[0]))) {
case 'http/1.0 100 ok':
case 'http/1.0 200 ok':
case 'http/1.1 100 ok':
case 'http/1.1 200 ok':
return true;
break;
}
return false;
}
//
// Unchunk http content. Returns unchunked content on success,
// false on any errors... Borrows from code posted above by
// jbr at ya-right dot com.
//
function unchunkHttpResponse($str=null) {
if (!is_string($str) or strlen($str) < 1) { return false; }
$eol = "\r\n";
$add = strlen($eol);
$tmp = $str;
$str = '';
do {
$tmp = ltrim($tmp);
$pos = strpos($tmp, $eol);
if ($pos === false) { return false; }
$len = hexdec(substr($tmp,0,$pos));
if (!is_numeric($len) or $len < 0) { return false; }
$str .= substr($tmp, ($pos + $add), $len);
$tmp = substr($tmp, ($len + $pos + $add));
$check = trim($tmp);
} while(!empty($check));
unset($tmp);
return $str;
}
?>
kj83 at op dot pl
18-Aug-2008 12:34
18-Aug-2008 12:34
Sending multiple files with form(modification of sir_reality2001 at yahoo dot com's and Duukkis's scripts):
<?php
$boundary = "AaB03x";
$boundary2 = "BbC04y";
// Build the header
$header = "POST remoteurl HTTP/1.0\r\n";
$header .= "Host: remotehost\r\n";
$header .= "Content-Type: multipart/form-data; boundary=$boundary\r\n";
// attach post vars
foreach($_POST AS $index => $value){
$data .="--$boundary\r\n";
$data .= "Content-Disposition: form-data; name=\"".$index."\"\r\n";
$data .= "\r\n".$value."\r\n";
$data .="--$boundary\r\n";
}
// and attach the file
for ($i=0; $i<count($_FILES['userfile']['name']);$i++)
{
$data .= "--$boundary\r\n";
if ($_FILES['userfile']['name'][$i] != '')
{
$content_file = join("", file($_FILES['userfile']['tmp_name'][$i]));
$data.="Content-Disposition: file; name=\"userfile[$i]\"; filename=\"".$_FILES['userfile']['name'][$i]."\"\r\n";
$data .= "Content-Type: ".$_FILES['userfile']['type'][$i]."\r\n\r\n";
$data .= "".$content_file."\r\n";
$data .="--$boundary\r\n";
}
}
$data .="--$boundary--\r\n";
$header .= "Content-length: " . strlen($data) . "\r\n\r\n";
$fp = fsockopen($remote_server, 80);
?>
admin at lab-9 dot com
21-Jul-2008 02:32
21-Jul-2008 02:32
When you try to POST/GET requests via HTTPS over SSL/TLS you should notice this:
<?php
// preconditions
$port = 80 | 443
$host = "www.example.com";
$method = "POST" | "GET";
$contenttype = "text/html" | "text/plain" | "text/xml" | ...;
$data = "<something>";
// script
if($port == 443)
$sslhost = "ssl://".$host;
else
$sslhost = $host;
$fp = fsockopen($sslhost, $port);
fputs($fp, "$method $path HTTP/1.1\r\n");
fputs($fp, "Host: $host\r\n");
fputs($fp, "Content-type: $contenttype\r\n");
fputs($fp, "Content-length: ".strlen($data)."\r\n");
fputs($fp, "Connection: close\r\n");
fputs($fp, "\r\n");
?>
The server usually does not understand the HTTP-header "Host: XXX" if you provide it with the trailing "ssl://" used by fsockopen(); If you do it anyway you probably get a HTTP 400 back as response. :-)
dot dot dot dot dot alexander at gmail dot com
08-Mar-2008 04:15
08-Mar-2008 04:15
An edit to my below function for extra headers support and a bit of debugging
( array("key" => "value") type)
<?php
if(!function_exists("download")){
function download($uri, $port = 80, $extra_headers = NULL){
if(!function_exists("stripos")){
function stripos($str, $needle, $offset=0){
return strpos(strtolower($str),strtolower($needle),$offset);
}/* endfunction stripos */
}/* endfunction exists stripos*/
if(!is_int($port))$port = 80;
if(!is_array($extra_headers))$extra_headers = array();
$uri = strtr( strval($uri), array("http://" => "", "https://" => "ssl://", "ssl://" => "ssl://", "\\" => "/", "//" => "/") );
if( ( $protocol = stripos($uri, "://") ) !== FALSE ){
if( ( $domain_pos = stripos($uri, "/", ($protocol + 3)) ) !== FALSE ){
$domain = substr($uri, 0, $domain_pos);
$file = substr($uri, $domain_pos);
}
else{
$domain = $uri;
$file = "/";
}
}
else{
if( ( $domain_pos = stripos($uri, "/") ) !== FALSE ){
$domain = substr($uri, 0, $domain_pos);
$file = substr($uri, $domain_pos);
}
else{
$domain = $uri;
$file = "/";
}
}
$fp = fsockopen($domain, $port, $errno, $errstr, 30);
if(!$fp){
return FALSE;
}
else{
$out = "GET " . $file . " HTTP/1.1\r\n";
$out .= "Host: " . $domain . "\r\n";
foreach( $extra_headers as $nm => $vl ){
$out .= strtr( strval($nm), array( "\r" => "", "\n" => "", ": " => "", ":" => "") ) . ": " . strtr( strval($vl), array( "\r" => "", "\n" => "", ": " => "", ":" => "") ) . "\r\n";
}
$out .= "Connection: Close\r\n\r\n";
$response = "";
fwrite($fp, $out);
while (!feof($fp)) {
$response .= fgets($fp, 128);
}
fclose($fp);
global $http_response_header;
$http_response_header = array();
if( stripos($response, "\r\n\r\n") !== FALSE ){
$hc = explode("\r\n\r\n", $response);
$headers = explode("\r\n", $hc[0]);
if(!is_array($headers))$headers = array();
foreach($headers as $key => $header){
$a = "";
$b = "";
if( stripos($header, ":") !== FALSE ){
list($a, $b) = explode(":", $header);
$http_response_header[trim($a)] = trim($b);
}
}
return end($hc);
}
else if( stripos($response, "\r\n") !== FALSE ){
$headers = explode("\r\n", $response);
if(!is_array($headers))$headers = array();
foreach($headers as $key => $header){
if( $key < ( count($headers) - 1 ) ){
$a = "";
$b = "";
if( stripos($header, ":") !== FALSE ){
list($a, $b) = explode(":", $header);
$http_response_header[trim($a)] = trim($b);
}
}
}
return end($headers);
}
else{
return $response;
}
}
}/*endfunction download*/
}/*endif no function download*/
?>
huli0401 at gmail dot com
27-Dec-2007 06:12
27-Dec-2007 06:12
<?php
// Check for new version
$current_version = explode('.', '1.0.00');
$minor_revision = (int) $current_version[2];
$errno = 0;
$errstr = $version_info = '';
if ($fsock = fsockopen("www.exanmple.eu", 80, $errno, $errstr, 30))
{
@fputs($fsock, "GET /ver.txt HTTP/1.1\r\n");
@fputs($fsock, "HOST: www.example.eu\r\n");
@fputs($fsock, "Connection: close\r\n\r\n");
$get_info = false;
while (!@feof($fsock))
{
if ($get_info)
{
$version_info .= @fread($fsock, 1024);
}
else
{
if (@fgets($fsock, 1024) == "\r\n")
{
$get_info = true;
}
}
}
@fclose($fsock);
$version_info = explode("\n", $version_info);
$latest_head_revision = (int) $version_info[0];
$latest_minor_revision = (int) $version_info[2];
$latest_version = (int) $version_info[0] . '.' . (int) $version_info[1] . '.' . (int) $version_info[2];
if ($latest_head_revision == 2 && $minor_revision == $latest_minor_revision)
{
$version_info = '<p style="color:green">OK</p>';
}
else
{
$version_info = '<p style="color:red">neaktualne';
$version_info .= '<br />'Latest_version_info' . $latest_version) . ' ' . sprintf(Current_version_info'. '1.0.00') . '</p>';
}
}
else
{
if ($errstr)
{
$version_info = '<p style="color:red">' . sprintf(Connect_socket_error) . '</p>';
}
else
{
$version_info = '<p>'Socket_functions_disabled'</p>';
}
}
$version_info .= '<p>'Mailing_list_subscribe_reminder'</p>';
echo $version_info;
?>
landerretche at free dot fr
05-Dec-2007 11:59
05-Dec-2007 11:59
Make a ping test with PHP
The problem with fsockopen is you have to known the destination port.
A real ping function could be :
<?php
function php_ping($url) {
$addr=parse_url($url);
$host=$addr['host'];
exec("ping -c 1 -w 1 $host", $list);
if (strpos($list[4],"1 received")>0) {
return true ;
}
return false;
}
?>
But if your router refuse the ping ... the result will be always false > you may test both (fsockopen and ping)
dali at dali dot net dot nz
14-Nov-2007 02:13
14-Nov-2007 02:13
After several days of trying to get telnet going from php 5.2, i've come up with http://www.dali.net.nz/Telnet.class.php.txt
based on the one found at http://cvs.adfinis.ch/cvs.php/phpStreamcast/telnet.class.php
example usage:
<?php
$telnet = new Telnet('telnethost.example.com');
$telnet->login('username', 'password');
echo $telnet->exec('ifconfig') . "\n";
echo $telnet->exec('ls -lh') . "\n";
$telnet->disconnect();
?>
anarchy
05-Sep-2007 03:34
05-Sep-2007 03:34
I don't know why it's not mentioned here (or am I missing something), but the DEFAULT stream timeout is set according to default_socket_timeout in your php.ini file. Took forever for me to dig that up....
bradland at umich dot edu
23-Jul-2007 06:32
23-Jul-2007 06:32
I was having trouble doing an https in fopen and with fsockopen where the address had ssl://. I was getting error code 114 in the log. After much research i found that there was some ssl conflict trouble with MySQL 5.0.20-5.0.33. It had some functions that were interfering with openssl that showed up in the php install.
http://bugs.mysql.com/bug.php?id=21930
http://bugs.mysql.com/bug.php?id=19289
warezthebeef at gmail dot com
17-Jul-2007 01:37
17-Jul-2007 01:37
I ran into a problem where I needed to make an fsockopen() style connection from one specific ip address on a server with multiple ip aliases. Unfortunately fsockopen() does not allow the specification of a source address making it unsuitable. I could not find any other solutions elsewhere so here is mine for those with php 5.1.0 or greater.
<?php
// connect to the internet using the '192.168.0.100' IP
$opts = array('socket' => array('bindto' => '192.168.0.100:0'));
$context = stream_context_create($opts);
$fp = stream_socket_client("tcp://www.example.com:80", $errno, $errstr, 30, STREAM_CLIENT_CONNECT, $context);
?>
Now $fp can be used like a resource handle returned by a vanilla fsockopen() call!
aska at unit-mse dot jp
03-Jul-2007 03:58
03-Jul-2007 03:58
easy get UIDL.
A code is better than the feof.
<?php
$fp = fsockopen($host, 110, $errno, $errstr, 5);
if ($fp > 0) {
fread($fp,1024);
fputs($fp, "USER $user\r\n");
fread($fp,1024);
fputs($fp, "PASS $pass\r\n");
fread($fp,1024);
fputs($fp, "UIDL\r\n");
fgets($fp,1024);
do {
$line = rtrim(fgets($fp, 1024));
if ($line == '.') break;
list(, $UIDL) = split(' ', $line, 2);
echo $UIDL;
} while ($line != '.');
fputs($fp, "QUIT\r\n");
}
fclose($fp);
?>
Alexander Wegener
26-May-2007 04:29
26-May-2007 04:29
To check if a Url is Online (with http and https)
Using @fgets to hide Warning when using SSL
(Bug: "Warning: function.fgets SSL: fatal protocol error", http://bugs.php.net/bug.php?id=23220)
<?php
function isOnline($url) {
if (!$url_info = parse_url($url)) {
return false;
}
switch ($url_info['scheme']) {
case 'https':
$scheme = 'ssl://';
$port = 443;
break;
case 'http':
default:
$scheme = '';
$port = 80;
}
$data = "";
$fid = @fsockopen($scheme . $url_info['host'], $port, $errno, $errstr, 30);
if ($fid) {
fputs($fid, 'HEAD ' . (isset($url_info['path'])? $url_info['path']: '/') . (isset($url_info['query'])? '?' . $url_info['query']: '') . " HTTP/1.0\r\n" .
"Connection: close\r\n" .
'Host: ' . $url_info['host'] . "\r\n\r\n");
while (!feof($fid)) {
$data .= @fgets($fid, 128);
}
fclose($fid);
return !empty($data);
} else {
return false;
}
}
?>
02-Mar-2007 04:01
HTTP/1.1 requires that all clients support chunked transfer encoding. If you don't want to implement that and just want something simple, make HTTP/1.0 requests instead:
<?php
...
fputs("GET $path HTTP/1.0\r\n");
fputs("Host: $host\r\n");
...etc..
?>
jbr at ya-right dot com
02-Mar-2007 05:17
02-Mar-2007 05:17
[EDIT by danbrown AT php DOT net: This note contains a big-fixed version of the user function decode_body(). Fix by (martjean77 at hot dot sapm dot mail dot com) [sic].]
Handling chunked data needs careful handling, because the data can also be compressed inside the chunked data, and chunked data can have many parts, so you need to watch for that. Here a simple example that uses one function decode_header(); to build the header into a key => value array, so it makes it easy to test for the content and transfer types inside the decode_body(); function!
<?php
function decode_header ( $str )
{
$part = preg_split ( "/\r?\n/", $str, -1, PREG_SPLIT_NO_EMPTY );
$out = array ();
for ( $h = 0; $h < sizeof ( $part ); $h++ )
{
if ( $h != 0 )
{
$pos = strpos ( $part[$h], ':' );
$k = strtolower ( str_replace ( ' ', '', substr ( $part[$h], 0, $pos ) ) );
$v = trim ( substr ( $part[$h], ( $pos + 1 ) ) );
}
else
{
$k = 'status';
$v = explode ( ' ', $part[$h] );
$v = $v[1];
}
if ( $k == 'set-cookie' )
{
$out['cookies'][] = $v;
}
else if ( $k == 'content-type' )
{
if ( ( $cs = strpos ( $v, ';' ) ) !== false )
{
$out[$k] = substr ( $v, 0, $cs );
}
else
{
$out[$k] = $v;
}
}
else
{
$out[$k] = $v;
}
}
return $out;
}
function decode_body ( $info, $str, $eol = "\r\n" )
{
$tmp = $str;
$add = strlen ( $eol );
$str = '';
if ( isset ( $info['transfer-encoding'] ) && $info['transfer-encoding'] == 'chunked' )
{
do
{
$tmp = ltrim ( $tmp );
$pos = strpos ( $tmp, $eol );
$len = hexdec ( substr ( $tmp, 0, $pos ) );
if ( isset ( $info['content-encoding'] ) )
{
$str .= gzinflate ( substr ( $tmp, ( $pos + $add + 10 ), $len ) );
}
else
{
$str .= substr ( $tmp, ( $pos + $add ), $len );
}
$tmp = substr ( $tmp, ( $len + $pos + $add ) );
$check = trim ( $tmp );
}
while ( ! empty ( $check ) );
}
else if ( isset ( $info['content-encoding'] ) )
{
$str = gzinflate ( substr ( $tmp, 10 ) );
}
else {
$str = $tmp;
}
return $str;
}
if ( ( $io = fsockopen( "www.yahoo.com", 80, $errno, $errstr, 5 ) ) !== false )
{
$send = "GET / HTTP/1.1\r\n";
$send .= "Host: www.yahoo.com\r\n";
$send .= "User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20021204\r\n";
$send .= "Referer: http://www.yahoo.com/\r\n";
$send .= "Accept: text/xml,application/xml,application/xhtml+xml,";
$send .= "text/html;q=0.9,text/plain;q=0.8,video/x-mng,image/png,";
$send .= "image/jpeg,image/gif;q=0.2,text/css,*/*;q=0.1\r\n";
$send .= "Accept-Language: en-us, en;q=0.50\r\n";
$send .= "Accept-Encoding: gzip, deflate, compress;q=0.9\r\n";
$send .= "Connection: Close\r\n\r\n";
fputs ( $io, $send );
$send = '';
do
{
$send .= fgets ( $io, 4096 );
} while ( strpos ( $send, "\r\n\r\n" ) === false );
$info = decode_header ( $send );
$send = '';
while ( ! feof ( $io ) )
{
$send .= fread ( $io, 8192 );
}
fclose ( $io );
$send = decode_body ( $info, $send );
echo '<h3>Header Array</h3>';
echo '<pre>';
print_r ( $info );
echo '</pre>';
echo '<h3>Document Body</h3>';
echo $send;
}
?>
ryan1_00 at hotmail dot com
29-Jan-2007 04:52
29-Jan-2007 04:52
This script checks specific ports so you need to have the correct port open on the server for this to work.
E.g if i have a windows domain controller and it is servering LDAP then the following would be used to check it is online:
<?php
chkServer("MyDC", "389");
?>
for a webserver:
<?php
chkServer("MyWebSvr", "80");
?>
etc etc
--------------------------------------------------------
<?php
// check if a server is up by connecting to a port
function chkServer($host, $port)
{
$hostip = @gethostbyname($host); // resloves IP from Hostname returns hostname on failure
if ($hostip == $host) // if the IP is not resloved
{
echo "Server is down or does not exist";
}
else
{
if (!$x = @fsockopen($hostip, $port, $errno, $errstr, 5)) // attempt to connect
{
echo "Server is down";
}
else
{
echo "Server is up";
if ($x)
{
@fclose($x); //close connection
}
}
}
}
?>
v13+phpnet at it dot teithe dot gr
25-Jan-2007 12:01
25-Jan-2007 12:01
The following function performs pop3 authentication. Returns NULL on error, or true/false to indicate username/password matching:
$address is the hostname of the server and $ssl is a boolean that indicates whether an SSL connection is requested.
<?php
function pop3authCheck($username, $password, $address, $ssl)
{
if ($ssl)
$uri="ssl://$address:995";
else
$uri="tcp://$address:110";
$fp=fsockopen($uri);
if (!$fp)
return(NULL);
$st=fgets($fp, 512);
if (substr($st, 0, 3)!="+OK")
{
fclose($fp);
return(NULL);
}
$st="USER $username\n";
if (fwrite($fp, $st)!=strlen($st))
{
fclose($fp);
return(NULL);
}
$st=fgets($fp, 512);
if (substr($st, 0, 3)!="+OK")
{
fclose($fp);
return(NULL);
}
$st="PASS $password\n";
if (fwrite($fp, $st)!=strlen($st))
{
fclose