pclose
To run a php script and not wait for it I use this on windows
$commandString = "start /b c:\\php\\php.EXE c:\\image\\cleanup.php --passaccount=$account --passcount=$count";
pclose(popen($commandString, 'r'));
Note to pass my script vars you need dashdash.
to read the var use --this is in cleanup.php
<?php
function arguments($argv) {
$_ARG = array();
foreach ($argv as $arg) {
if (ereg('--[a-zA-Z0-9]*=.*',$arg)) {
$str = split("=",$arg); $arg = '';
$key = ereg_replace("--",'',$str[0]);
for ( $i = 1; $i < count($str); $i++ ) {
$arg .= $str[$i];
}
$_ARG[$key] = $arg;
} elseif(ereg('-[a-zA-Z0-9]',$arg)) {
$arg = ereg_replace("-",'',$arg);
$_ARG[$arg] = 'true';
}
}
return $_ARG;
}
sleep(5);
$var_array= arguments($argv);
extract($var_array, EXTR_PREFIX_SAME, "wddx");//$user comes from here
//echo "hello new $user";
$account=$passaccount;
$count=$passcount;
?>
popen
(PHP 4, PHP 5)
popen — Crée un processus de pointeur de fichier
Description
resource popen
( string $command
, string $mode
)
Crée un processus de pointeur de fichier, exécuté en effectuant un fork de la commande fournie par le paramètre command .
Liste de paramètres
- command
-
La commande
- mode
-
Le mode
Valeurs de retour
Retourne un pointeur de fichier identique à celui retourné par fopen(), hormis le fait qu'il sera unidirectionnel (lecture seule, ou écriture seule), et doit être terminé par pclose(). Ce pointeur peut être utilisé avec fgets(), fgetss() et fwrite().
Si une erreur survient, la fonction retournera FALSE.
Exemples
Exemple #1 Exemple avec popen()
<?php
$handle = popen("/bin/ls", "r");
?>
Si la commande à exécuter n'a pu être trouvée, une ressource valide sera retournée. Cela semble étrange, mais c'est pratique. cela vous permet d'accéder aux messages d'erreur qui ont été retournés par le Shell :
Exemple #2 Exemple avec popen()
<?php
error_reporting(E_ALL);
/* Ajoute une redirection pour que vous puissiez lire stderr. */
$handle = popen('/path/to/spooge 2>&1', 'r');
echo "'$handle'; " . gettype($handle) . "\n";
$read = fread($handle, 2096);
echo $read;
pclose($handle);
?>
Notes
Note: Si vous souhaitez un support bidirectionnel (two-way), utilisez la fonction proc_open().
Note: Lorsque le safe mode est activé, vous pouvez uniquement exécuter des programmes qui se situent dans le dossier défini par safe_mode_exec_dir. Pour des raisons pratiques, il n'est actuellement pas permis d''avoir le composant .. dans le chemin de l'exécutable.
Avertissement
Lorsque le safe mode est activé, la chaîne de commande est échappée avec la fonction escapeshellcmd(). Par exemple, echo y | echo x devient echo y \| echo x.
Voir aussi
- pclose() - Ferme un processus de pointeur de fichier
- fopen() - Ouvre un fichier ou une URL
- proc_open() - Exécute une commande et ouvre les pointeurs de fichiers pour les entrées / sorties
add a note
User Contributed Notespopen
lwalker at snet dot net
17-Sep-2009 08:56
17-Sep-2009 08:56
webmaster at php-idee dot de
23-Jul-2009 03:36
23-Jul-2009 03:36
If you try to execute a command under Windows the PHP script normally waits until the process has been terminated. Executing long-term processes pauses a PHP script even if you don't want to wait for the end of the process.
It wasn't easy to find this beautiful example how to start a process under Windows without waiting for its termination:
<?php
$commandString = 'start /b c:\\programToRun.exe -attachment "c:\\temp\file1.txt"';
pclose(popen($commandString, 'r'));
?>
Marbug at gmail dot com
03-Feb-2009 12:43
03-Feb-2009 12:43
If you want to download files from a linux server with a filesize bigger than 2GB you can use the following:
<?php
function serveFile( $file , $as ){
header( 'Expires: Mon, 1 Apr 1974 05:00:00 GMT' );
header( 'Pragma: no-cache' );
header( 'Cache-Control: must-revalidate, post-check=0, pre-check=0' );
header( 'Content-Description: File Download' );
header( 'Content-Type: application/octet-stream' );
header( 'Content-Length: '.trim(`stat -c%s "$file"`) );
header( 'Content-Disposition: attachment; filename="'. $as .'"' );
header( 'Content-Transfer-Encoding: binary' );
//@readfile( $file );
flush();
$fp = popen("tail -c ".trim(`stat -c%s "$file"`)." ".$file.' 2>&1', "r");
while(!feof($fp))
{
// send the current file part to the browser
print fread($fp, 1024);
// flush the content to the browser
flush();
}
fclose($fp);
}
?>
rockytriton
10-Sep-2007 08:25
10-Sep-2007 08:25
Note, when using this with a batch file in windows, you must put an "exit" at the end of your batch file or you will get a new cmd.exe stuck in your process list every time you execute the page.
betchern0t
14-Apr-2007 06:42
14-Apr-2007 06:42
Care needs to be taken in the case of long running child processes. Say you want to run tail -f /var/log/messages or in my case burn dvds. If you have a busy wait, Apache2 can sit towards 100%cpu and steadily grow memory. In my case I crashed the server after about an hour and 90% of the dvd burned. During that time apache had consumed a gig of swap.
Offending code - don't copy:
<?php
$ThisCommand = sprintf("%s %s",COMMAND,$ThisFile);
$fp=popen($ThisCommand,"r");
while (!feof($fp)) {
set_time_limit (20);
$results = fgets($fp, 4096);
if (strlen($results) == 0) {
// stop the browser timing out
echo " ";
flush();
} else {
$tok = strtok($results, "\n");
while ($tok !== false) {
echo htmlentities(sprintf("%s\n",$tok))."<br/>";
flush();
$tok = strtok("\n");
}
}
}
pclose($fp);
?>
to go from zero memory and 100% cpu to negligible memory and negligible cpu add a sleep.
<?php
while (!feof($fp)) {
set_time_limit (20);
$results = fgets($fp, 256);
if (strlen($results) == 0) {
// stop the browser timing out
echo " ";
flush();
} else {
$tok = strtok($results, "\n");
while ($tok !== false) {
echo htmlentities(sprintf("%s\n",$tok))."<br/>";
flush();
$tok = strtok("\n");
}
}
// avoid a busy wait
sleep(1);
}
?>
I think the continued banging of the space to keep the browser awake triggered some issues in apache.
Nate
21-Oct-2006 01:21
21-Oct-2006 01:21
Note that under Windows, if you are trying to write data to be available to your pipe's STDIN, you may need to execute php directly, rather than depending on file associations.
<?php
// with $cmd set to 'foo.php', STDIN comes up blank.
// with $cmd set to 'php foo.php', STDIN gets filled
// (assuming php.exe is in your path)
$cmd = 'foo.php';
if ( ($fh = popen($cmd, 'w')) === false )
die("Open failed: ${php_errormsg}\n");
fwrite($fh, "Line one\nLine two\n");
pclose($fh);
?>
nospam at spamalot dot com
30-Aug-2006 03:19
30-Aug-2006 03:19
popen() seems to have problems dealing with binary data (piping audio data to the standard input of an encoding application). I changed to proc_open() instead and now everything is working fine.
Christian
10-May-2006 08:33
10-May-2006 08:33
Thanks a lot to tr4nc3 at msn dot com..
when using apache on Windows XP, on 'console mode' commands work fine, but as a system service, commands like 'popen' stop functioning, to resolve this:
Start>Run>services.msc
Right click "Apache...", select properties.
Click on the "LOG ON" tab
Check the box "Allow this service to interact with desktop"
Click OK
Restart Apache
don at digithink dot com
20-Dec-2005 01:28
20-Dec-2005 01:28
<?php
// The above import function can be easily extended using
// /usr/local/bin/xls2csv (part of catdoc ) and popen
// to read excell files directly.
// In our particular application the first line was the file heading.
function importxls($file,$head=true,$throwfirst=true,$delim=",",$len=1000) {
$return = false;
$handle = popen("/usr/local/bin/xls2csv $file", "r");
// or die if not there.
if ($throwfirst) {
$throw = fgetcsv($handle, $len, $delim);
}
if ($head) {
$header = fgetcsv($handle, $len, $delim);
}
while (($data = fgetcsv($handle, $len, $delim)) !== FALSE) {
if ($head AND isset($header)) {
foreach ($header as $key=>$heading) {
$row[$heading]=(isset($data[$key])) ? $data[$key] : '';
print "<li>". $heading ."=>" . $row[$heading]."</li>";
}
$return[]=$row;
} else {
$return[]=$data;
}
}
fclose($handle);
return $return;
}
?>
rjl at xs4all dot nl
23-Nov-2005 10:16
23-Nov-2005 10:16
Truncated output from ps command?
The solution lies in the way ps displays it's info
specifically the -w option which:
'uses 132 columns to display information,
instead of the default which is your window size.'....
somehow with fgets in php that results in 74 characters
regardless off the init length parameter
a bit of code:
<?php
echo '<table width="99%"><tr><td>cron</td></tr>' . "\n";
$fp=popen("/bin/ps -waux","r");
while (!feof($fp)) {
$buffer = fgets($fp, 4096);
$croninf .= '<tr><td>' . $buffer . '</td></tr>' . "\n";
}
pclose($fp);
echo $croninf;
echo '</table><br><br>' . "\n";
?>
Ciao,
Rene =<>=
erb at agricola-gymnasium dot de
06-Oct-2005 02:48
06-Oct-2005 02:48
Writing and executing a bash script is as simple as that:
<?php
$f = popen ("/bin/bash","w");
fwrite($f, "export KRB5CCNAME=`tempfile`\n");
fwrite($f, "export KRBTKFILE=`tempfile`\n");
fwrite($f, "$KINIT --keytab=$GLOBALS["KADMIN_KEYFILE"] --use-keytab --afslog $GLOBALS["KADMIN_PRINC"]\n");
fwrite($f, "pts delete $uid\n");
fwrite($f, "fs rmmount $rwhome\n");
fwrite($f, "vos remove sanjo b user.$uid\n");
fwrite($f, "$KDESTROY\n");
pclose($f);
?>
Cride5
09-Sep-2005 02:39
09-Sep-2005 02:39
Here is a nice little script for monitoring your http access log.
<?php
$handle = popen("tail -f /etc/httpd/logs/access.log 2>&1", 'r');
while(!feof($handle)) {
$buffer = fgets($handle);
echo "$buffer<br/>\n";
ob_flush();
flush();
}
pclose($handle);
?>
----
www.eviltree.co.uk
www.solidsites.co.uk
www.mongbong.com
atampone at NOSPAMFORME dot trdsupra dot com
20-Jun-2005 03:26
20-Jun-2005 03:26
If you want to fork a process under windows, this is the function to use. I created a batch file called runcmd.bat with the following line
start %1 %2 %3 %4
then I have the folowing function
<?php
define('RUNCMDPATH', 'c:\\htdocs\\nonwebspace\\runcmd.bat');
function runCmd($cmd) {
$externalProcess=popen(RUNCMDPATH.' '.$cmd, 'r');
pclose($externalProcess);
}
?>
with this, doing something like
<?php runCmd('php.exe printWorkOrder.php 3498'); ?>
will launch php.exe outside of apache and allow the script calling the runCmd() function to continue without waiting for the command line process to return. The process will run under the same user account that Apache (or whatever webserver you're running) is running under, so make sure it has permissions to do whatever you need to do. Also, make sure that the batch file has enough %n s in order to pass all the command line variables that you might need to pass.
Special thanks to kicken from the devshed forums for coming up with the idea.
PGP Dude
06-May-2005 09:30
06-May-2005 09:30
I should say, my host uses a modified form of safe mode, so I don't know if that might have caused a problem with "popen" as opposed to "proc_open". With safe mode enabled, all words following the initial command string are treated as a single argument. Thus, echo y | echo x becomes echo "y | echo x". [Because of this,] LinixDude010's srcipt did not work for me. Seems wrong to read and write with popen, according to the manual.
The script produced pgp text, but there was something wrong with the text and I could not decode it.
This replacement script, using proc_open, which can read and write, DOES work:
<?php
function pgp_encrypt($keyring_location, $public_key_id, $plain_text) {
$encrypted_text='';
$key_id = EscapeShellArg($public_key_id);
putenv("PGPPATH=$keyring_location");
// encrypt the message
$descriptorspec = array(
0 => array("pipe", "r"), // stdin
1 => array("pipe", "w"), // stdout
2 => array("pipe", "w") // stderr ?? instead of a file
);
$process = proc_open("pgpe -r $key_id -af", $descriptorspec, $pipes);
if (is_resource($process)) {
fwrite($pipes[0], $plain_text);
fclose($pipes[0]);
while($s= fgets($pipes[1], 1024)) {
// read from the pipe
$encrypted_text .= $s;
}
fclose($pipes[1]);
// optional:
while($s= fgets($pipes[2], 1024)) {
$encrypted_text.= "\n<p>Error: $s</p>\n";
}
fclose($pipes[2]);
}
return $encrypted_text;
}
$message = pgp_encrypt("/home/username/.pgp", "to@domain.com", "dummy text to be encrypted");
print nl2br($message);
?>
shaun at nospam dot phplabs dot com
27-Feb-2005 02:52
27-Feb-2005 02:52
Note that there appears to be a limit to the amount of data that fread() will return from a handle opened with popen(). A call to fread() may not return as much as you ask for.
For example, suppose I have a file "myfile.txt" which is more than 10KB in size. The following code works as expected:
<?php
$fp = fopen('myfile.txt', 'r');
$data = fread($fp, 10240);
echo strlen($data);
?>
The output is '10240.' However, popen() behaves differently:
<?php
$fp = popen('/bin/cat myfile.txt', 'r');
$data = fread($fp, 10240);
echo strlen($data);
?>
On my system, this code prints out '8192' instead of the expected '10240.'
kalvinb602 at hotmail dot com
07-Jul-2004 12:42
07-Jul-2004 12:42
If you're having trouble with the server (Apache) hanging when issuing system commands consider the following bug report:
http://bugs.php.net/bug.php?id=22526
basically, if you're using sessions issue a
session_write_close();
command before you execute your system command to keep the server from hanging.
This may also correct the problem when using other system command executing functions like exec.
Ben
Michel Machado
07-Mar-2004 02:53
07-Mar-2004 02:53
Yet another workaround for not having bidirectional pipes in php.
<?php
$Cmd =
"bc 2>&1 << END\n" .
"100+221\n" .
"1+3*3\n" .
"quit\n" .
"END\n";
$fp = popen($Cmd, 'r');
$read = fread($fp, 1024);
echo $read;
pclose($fp);
?>
http://vmlinuz.nl/about/contact/
11-Nov-2002 05:58
11-Nov-2002 05:58
From the popen linux programmers manual:
"The command argument is a pointer to a null-terminated string containing a shell command line. This command is passed to /bin/sh using the -c flag."
Since php uses this popen function, you need to be sure /bin/sh exists. This file may not exist in chroot()ed environments.
ajv-php at erkle dot org
08-Aug-2002 08:02
08-Aug-2002 08:02
I noticed that some of the examples above seem to advocate passing unencrypted data to gpg via the pipe shell escape, in the absence of a bi-directional popen (on some OSes).
The approach I've taken is similar to:
<?php
$prefix = 'example';
$command = '/usr/local/bin/gpg --encrypt --armor --no-tty --batch --no-secmem-warning --recipient "joe.soap@example.com"';
$tmpfile = tempnam('/tmp', $prefix);
$pipe = popen("$command 2>&1 >$tmpfile", 'w');
if (!$pipe) {
unlink($tmpfile);
} else {
fwrite($pipe, $plaintxt, strlen($plaintxt));
pclose($pipe);
$fd = fopen($tmpfile, "rb");
$output = fread($fd, filesize($tmpfile));
fclose($fd);
unlink($tmpfile);
}
return $output;
?>
This means that unencrypted information is not passed via a (potentially readable) shell command, and only encrypted information gets stored on disc.
12-Jul-2002 11:33
Here is a workaround for not having bidirectional pipes in php.
If you have bidirectional pipe support, don't bother with this.
The trick here is to send the input on the command line to the target application. In particular I wanted to use openssl without using temp files or named pipes. This solution should also be thread/process safe.
This does work on Linux (RedHat 7).
<?php
function filterThroughCmd($input, $commandLine) {
$pipe = popen("echo \"$input\"|$commandLine" , 'r');
if (!$pipe) {
print "pipe failed.";
return "";
}
$output = '';
while(!feof($pipe)) {
$output .= fread($pipe, 1024);
}
pclose($pipe);
return $output;
}
# example:
print filterThroughCmd("hello", "cat");
# Piping to cat has the effect of echoing your input.
?>
cyberlot at cyberlot dot net
30-Jun-2002 10:29
30-Jun-2002 10:29
The below code works for both way processing ;) Have fun folks
<?php
system("mkfifo pipeout");
$pipe = popen("./nwserver -module Chapter1E > pipeout","w");
$pipeout = fopen("pipeout", "r");
while ($s = fgets($pipeout,1024)) {
echo $s;
}
?>
linuxdude010 at yahoo dot com
24-May-2002 08:49
24-May-2002 08:49
I had all kinds of trouble encrypting a message with PGP, but I finanlly got it to work. The trick was to 'chmod o+r pubring.pkr' so that the apache server could read the public keys!!! Then, this function worked fine:
<?PHP
function pgp_encrypt($keyring_location, $public_key_id, $plain_text) {
$key_id = EscapeShellArg($public_key_id);
putenv("PGPPATH=$keyring_location");
// encrypt the message
$pipe = popen("pgpe -r $key_id -af", "r");
fwrite($pipe, $plain_text);
$encrypted_text = '';
while($s = fgets($pipe, 1024)) {
// read from the pipe
$encrypted_text .= $s;
}
pclose($pipe);
return $encrypted_text;
}
$message = pgp_encrypt("/home/username/.pgp", "to@domain.com", "dummy text to be encrypted");
print nl2br($message);
?>
nricciardi at mindspring dot com
09-Mar-2002 01:38
09-Mar-2002 01:38
ive tried using popen using bidirectional pipes without working for obvious reasons, but i managed to create a simple script that managed to take care of the problem. This example is for gpg encryption.
<?php
$message = "this is the text to encrypt with gpg";
$sendto = 'Dummy Key <another@fake.email>';
system("mkfifo pipein");
system("mkfifo pipeout");
system("gpg --encrypt -a -r '$sendto' > pipeout < pipein &");
$fo = fopen("pipeout", "r");
$fi = fopen("pipein", "w");
fwrite($fi, $message, strlen($message));
fclose($fi);
while (!feof($fo)) {
$buf .= fread($fo, 1024);
}
echo $buf;
unlink("pipein");
unlink("pipeout");
?>
If anyone has a better way of doing this I would love to see it.
kevin at pricetrak dot com
29-Jun-2001 08:26
29-Jun-2001 08:26
Just a quick note about your environment. None of the apache specific environment variables are available to the called program.
trevor at verite dot com
16-Feb-2001 09:42
16-Feb-2001 09:42
Just make sure that you check the user information being passed into the command (if any) before it executes.
matthew at leftcoast dot com
04-Oct-2000 03:16
04-Oct-2000 03:16
Note that your OS must support bi-direction pipes for popen to be bi-directional.
FreeBSD and BSDI are known to support bi-pipes.
Not sure about Linux.